用动力学模型定量分析低钠透析液对钠清除量的影响

单亦升 田信奎 汪 涛

中国血液净化 ›› 2005, Vol. 4 ›› Issue (3) : 127-130.

PDF(3143 KB)
PDF(3143 KB)
中国血液净化 ›› 2005, Vol. 4 ›› Issue (3) : 127-130.
论著

用动力学模型定量分析低钠透析液对钠清除量的影响

  • 单亦升 田信奎 汪 涛
作者信息 +
文章历史 +

摘要

目的 定量地分析低钠透析液对钠清除量的影响以便为临床减少钠潴留的发生提供策略。方法 我们依据三孔模型,建立了单次透析过程中钠转运的数学模型,描述了低钠透析液对钠清除量的影响。并在合理假设的基础上探讨了低钠透析液中合适的钠浓度。结果 钠浓度每降低5mmol/L,清除量增加0.23g。低钠透析液中合适的钠浓度可能128mmol/L。结论 低钠透析液能够明显增加钠的清除。

Abstract

Objective We quantitatively described the sodium removal with low-sodium dialysis solutions to prevent the development of sodium and fluid retention in peritoneal dialysis patients. Methods Kinetic model of sodium removal during single dwell time was established according to three-pore model, and by which the sodium removal with low-sodium dialysis solutions was analyzed. The appropriate sodium concentration in dialysis solutions was discussed. Results More than 0.23g sodium could be removed with 5 mmol/l of decrease in dialysate sodium concentration. The appropriate sodium concentration in dialysis solution may be about 128 mmol/l. Conclusion Our result demonstrated that low-sodium solution could significantly increase sodium removal.

关键词

钠潴留 / 钠清除 / 低钠透析液 / 动力学模型

Key words

Sodium removal / Low-sodium dialysis solution / Kinetic modelling

引用本文

导出引用
单亦升 田信奎 汪 涛. 用动力学模型定量分析低钠透析液对钠清除量的影响[J]. 中国血液净化. 2005, 4(3): 127-130
中图分类号: R318.16   

PDF(3143 KB)

Accesses

Citation

Detail

段落导航
相关文章

/